paperport.blogg.se - Auto tone generator

#Auto tone generator generator
#Auto tone generator manual
#Auto tone generator software

DPDT Relay Contact Rating: 1A 30VDC / 0.If you’re a singer, I’m sure you’ve heard a ton about vocal harmonizer pedals or as they’re sometimes called “vocal harmony processors”.

#Auto tone generator manual

Internal Time Base Accuracy: +/- 2ppm (63 seconds per year) without Atomic Clock sync or manual adjustment.

Time Base: 50 / 60 Hz or internal with atomic clock sync.

Maximum Load on Page Trigger Output: 1K Ohm.

Maximum Speaker Output Wire Run: 300 ft (91m), 18AWG.

Sound Pressure: 100dB 1 meter (loud electronic warble from 25AE paging horn).

Paging Amplifier Output: 2 Watts – powers up to (3) 8 Ohm or (16) 45 Ohm speakers.

Preamp (Audio 1 / Audio 2) Output: 6VRMS across 600 Ohms.

Operating Temperature: 32☏ to 90☏ (0☌ to 32☌).

Power: 120VAC / 13.8VAC 1.25A UL listed adapter provided.

#Auto tone generator software

The CTG-2 comes with programming software and a USB port to allow PC programming of timed events, schedules, Atomic clock synchronization, wave file download, message volume, day light savings time, leap year, auxiliary relay control, etc. The CTG-2’s extremely accurate time base can be manually synchronized, synchronized with 50 or 60 Hz power or can be programmed to periodically synchronize to the Atomic clock via its internal modem. The CTG-2 can be programmed with up to 14 schedules and up to 1,000 events allowing you to program an entire year or multiple years of schedules in advance. The unit is factory loaded with common school, business and factory tones but can be programmed with your custom tones / messages or updated from the list of WAV files from the Viking web site. The CTG-2 comes equipped with up to 6 minutes of CD quality WAV file audio storage for up to 14 different tones / messages. The CTG-2 can also be used as a master clock to synchronize Viking CL Series wireless clocks (DOD 466). The CTG-2 has four programmable trigger inputs which are ideal for triggering emergency alert tones / messages to indicate fire evacuation, severe weather, lock down, all clear or can be used in store caster applications for “customer service required” announcements, etc. This provides a cost effective way of signaling school period changes, factory shifts, breaks, lunch periods, etc.

#Auto tone generator generator

Viking’s model CTG-2 is a clock controlled tone / message generator designed to provide accurately timed tones and / or messages over an existing paging system. IMPORTANT: MODEL CTG-2 IS DISCONTINUED, USE CTG-2A Programmable message repeat count for trigger inputs.Time base selection: Atomic clock, 50 / 60Hz or internal.

Programmable volume control per tone / message.One mono line level pre-amp input and two audio outputs.24 hour digital clock displays hours and minutes.Programmable auxiliary relay contacts (DPDT).Page trigger outputs (12VDC and DPDT relay).Remote program via TCP / IP network when used with a USB over IP network hub.

Remote phone programming for on / off, schedule changes, time sync and resetting trigger inputs.

Factory loaded with school / factory tones and evacuation signals (ANSI S3.41), etc.

Non-volatile memory with 4 hour clock back up.

RS485 clock SYNC terminals for remote Master Clock control of Viking CL Series RF synchronized clocks.

Programmable Atomic Clock synchronization.

Automatic Day Light Savings Time and leap year correction.

4 programmable trigger inputs for emergency tones, etc.

6 minutes of CD quality WAV file record time.

Up to 14 schedules and up to 1,000 events.